The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Mikec10 · 11-07-2011, 01:31 AM

The tranny i have now is a 5lm60, the th350 was bolted to a 355 in a s10blazer, this is not my only vehicle. Next weekend when i have time to pull my old 5 speed to rebuild it cause somethings not right i'll take a look at the th350, im pretty sure it will bolt up to my crossmember. Im just not sure as to what flywheel and flexplate i need to get, the linkage i can probably get from pull a part or summit racing.

11-07-2011, 01:31 AM	#3
Mikec10 Registered User Join Date: Apr 2011 Location: Cleveland, Ohio Posts: 293	Re: Th350 The tranny i have now is a 5lm60, the th350 was bolted to a 355 in a s10blazer, this is not my only vehicle. Next weekend when i have time to pull my old 5 speed to rebuild it cause somethings not right i'll take a look at the th350, im pretty sure it will bolt up to my crossmember. Im just not sure as to what flywheel and flexplate i need to get, the linkage i can probably get from pull a part or summit racing. __________________ 1980 C10 SWB Yukon 5.3/5 speed 3.73 gears.