The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - '67 rear bag and c-notch install questions

Chevy4Life · 08-22-2003, 09:28 PM

O.K. I have my rear bags and c-notch. Looks like I'll need one 3/8" bolt coming up through the trailing arm into the bottom of the bag. Then I'll need to drill through the frame, crossmember, and c-notch. Two 3/8" holes and one 1" hole for the top mounts and air line. Is this correct? Is there anything else I need to know? What do you guys use to cut the air line hole?

Thanks,

Jay

08-22-2003, 09:28 PM	#1
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	'67 rear bag and c-notch install questions O.K. I have my rear bags and c-notch. Looks like I'll need one 3/8" bolt coming up through the trailing arm into the bottom of the bag. Then I'll need to drill through the frame, crossmember, and c-notch. Two 3/8" holes and one 1" hole for the top mounts and air line. Is this correct? Is there anything else I need to know? What do you guys use to cut the air line hole? Thanks, Jay Last edited by Chevy4Life; 08-23-2003 at 02:02 AM.