The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lukefalls · 11-13-2011, 10:45 PM

Good Luck finding a 4.10 Dana 44. Not many GM unit came that way. There were some 3/4 tons with 4.10, but by far most had 3.73 or 3.08 You can interchange any Dana 44 EXCEPT:

Ford High Pinion (HP)
Jeep HP
Anything HP
Jeep aluminum Dana 44
Late model JK Dana 44
maybe some other odd applications

Just remember that if you find a 4.10 set of gears and decide to use the entire carrier, the side gears may not be the same as what you need. Stay away from the Dana 41 (its a rear only) that looks very similar to the Dana 44

11-13-2011, 10:45 PM	#4
lukefalls Registered User Join Date: Feb 2011 Location: Fairbanks, Alaska Posts: 86	Re: 67 K20 Final Drive Ratio... Good Luck finding a 4.10 Dana 44. Not many GM unit came that way. There were some 3/4 tons with 4.10, but by far most had 3.73 or 3.08 You can interchange any Dana 44 EXCEPT: Ford High Pinion (HP) Jeep HP Anything HP Jeep aluminum Dana 44 Late model JK Dana 44 maybe some other odd applications Just remember that if you find a 4.10 set of gears and decide to use the entire carrier, the side gears may not be the same as what you need. Stay away from the Dana 41 (its a rear only) that looks very similar to the Dana 44