The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Keith Seymore · 11-21-2011, 03:38 PM

Yes. On the top horizontal flange of the frame rail, midway (fore/aft about where the seat would be), and I believe it's on the driver's side.

You will need a mirror, or to remove the cab in order to see it.

Should be one on the side of the trans as well, if the trans is original.

There are none stamped elsewhere in the cab sheetmetal (not like F car, for example, where there is a secret VIN under the heater box).

K

11-21-2011, 03:38 PM	#2
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,290	Re: Need Vin help!!! Yes. On the top horizontal flange of the frame rail, midway (fore/aft about where the seat would be), and I believe it's on the driver's side. You will need a mirror, or to remove the cab in order to see it. Should be one on the side of the trans as well, if the trans is original. There are none stamped elsewhere in the cab sheetmetal (not like F car, for example, where there is a secret VIN under the heater box). K __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ Last edited by Keith Seymore; 11-21-2011 at 03:45 PM.