|
Re: Front end quandary
Quote:
Originally Posted by zellway
I would like to get one with the full K member. My truck is a driver but it would not be to big of a deal to pull it all apart. As long as the studs for the upper A arms will fit from my 68 to the 73 up trucks that would save me some work.
|
The studs are the same for 1/2 tons & larger on 1-tons. The 73-87 upper a-arm shafts do have a concave side that requires a matching convex spacer/shim to center the shafts vs. the pre-73's which are flat on both sides.
If you use the 73-87 upper a-arms, get those convex washers.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|