The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Born Lucky · 11-27-2011, 10:50 PM

This engine is a 292 and I installed a new cam new lifters and new orings on the valves. I used a beak in oil to start her up.
Like I mentioned in my first post I ad a problem dialing in the rockers, but soon discovered a major vacuum leak. After fixing the leak the engine sounds and runs well. The only problem is that when I driving and it the gas it sounds like I still have to adjust the valves. I hear a little valve chatter.

11-27-2011, 10:50 PM	#4
Born Lucky Registered User Join Date: Mar 2010 Location: St Charles MO Posts: 481	Re: Help with Final adjustments This engine is a 292 and I installed a new cam new lifters and new orings on the valves. I used a beak in oil to start her up. Like I mentioned in my first post I ad a problem dialing in the rockers, but soon discovered a major vacuum leak. After fixing the leak the engine sounds and runs well. The only problem is that when I driving and it the gas it sounds like I still have to adjust the valves. I hear a little valve chatter.