[Evil Trailblazer SS]

The brake switch is the same style connector, but the brake switch is currently connected and has an orange wire and a white wire as all diagrams say my truck is supposed to have for the brake light switch. So this is not where that connector goes, Purple and Pink w/Black wires. What is strange, no diagrams I've seen call for these two colors on ANY connector under the dash.

Also, the green wire that was cut at the ignition switch ends up looking like the off shoot of the coolant temp sensor. As it comes from the sensor, it splits, one to the gauge cluster and one to the ignition switch. I have no idea what it does at the ignition switch, since it will power/ground through the gauge and ground at the sensor itself.
Posted via Mobile Device