Well with the motor buttoned up and put in the corner out of the way it was time to put the Brown truck back in the shop and work on the engine mounts and cross member
Original idea was to use the stock dodge mounts and put them in the Chevrolet Frame but upon further inspection the motor side of the mount was cracked in the cast part on both mounts.
Since that was not gonna work it was decide to order a mount kit from Tennessee Diesel Conversions these use factory Chevrolet BB isolators and have a bracket that mounts on the motor and comes with a Crossmember because the factory crossmember is not low enough to clear the oil pan
Here is a picture of the crossmember and new isolators in the truck