[vin63]

I fabricated a stainless steel tank that I mounted under the bed. It's not anything special - I installed internal baffles and plumbed it for several return and vent ports. For filling, I had a locking door in one of the bed wood planks, but will probably have a hinge set up for the plank that the filler cap sits under. Here is a photo of my tank, and I use a MagnaFuel EFI pump for my current carbureted set up, but plan to eventually go to fuel injection. For the stock in-cab tank, you would at least need to install a bottom feed port and one or two large return ports, depending the pump and fuel injection system you use.


...filter, pump and regulator in lower right hand corner...

...close up of my pump assembly...