Quote:
Originally Posted by N2TRUX
The best way to do a budget drop is to cut one coil off your stock front spring. That will give you a 2" drop . In the rear you can run a lowering shackle for +/- 2" and move the front spring mount up for another +/- 2" of drop. This will get you started till you can save up for drop spindles, a flip kit and C-notch.
Just remember, "Do Not" heat the front springs, cut them with a cut off wheel, or set them in a bucket of water if you must use a torch.
|
This is what I was going to say.
You can cut the spring for free, and buy a drop shackle.from.autozone for $30
Posted via Mobile Device