The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

gearheads78 · 12-15-2011, 07:37 PM

A 10" rim is really 11" lip to tip so you ar looking at 6" of wheel outside the hub face. Then you have at least 1/4" of tire bulge. Take a wheel off and drop a plumb bob off the inside edge of your fender. Now take a tape measure and measure 6 1/4" out from the hub. The distance past the string is minimum how far out the fender the tire will be.

12-15-2011, 07:37 PM	#2
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: 22 x 10 w/ 5" bs fit A 10" rim is really 11" lip to tip so you ar looking at 6" of wheel outside the hub face. Then you have at least 1/4" of tire bulge. Take a wheel off and drop a plumb bob off the inside edge of your fender. Now take a tape measure and measure 6 1/4" out from the hub. The distance past the string is minimum how far out the fender the tire will be.