The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

gotchamel · 12-18-2011, 06:14 PM

I just put together a 7 hole cluster with all VDO vision series electric gauges.120 mph speedo and 8000 tach.I wired it all using factory wiring for the most part, except for oil/water/tach sending wires.The clock will be a tough one,atleast if you want it to fit the center hole.A 3 3/8" gauge fits perfectly but I could not locate a clock that size.I did contact a speedo/gauge shop that will build one to match for around 400.00.I wired it quick disconnect with a 12 pin connector.I do realize that pics would help,I will take some when I drop the cluster.

12-18-2011, 06:14 PM	#7
gotchamel Registered User Join Date: Feb 2011 Location: islamorada fl. Posts: 466	Re: Building an Instrument cluster! I just put together a 7 hole cluster with all VDO vision series electric gauges.120 mph speedo and 8000 tach.I wired it all using factory wiring for the most part, except for oil/water/tach sending wires.The clock will be a tough one,atleast if you want it to fit the center hole.A 3 3/8" gauge fits perfectly but I could not locate a clock that size.I did contact a speedo/gauge shop that will build one to match for around 400.00.I wired it quick disconnect with a 12 pin connector.I do realize that pics would help,I will take some when I drop the cluster.