The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sneezys72 · 12-24-2011, 11:06 AM

I will look and see if I can find the box mine came in. I saved it because I also had a hard time finding them. Finally found them at the main Napa here in Phoenix. You should call ECE. If they don't have them, they will tell you where to get them. I went to a local spring shop a couple of years ago to get U bolts made and the guy said they were 2 1/2" springs. I told him they were 2 1/4" and he told me I was either wrong or they were not original. Took a spring in for him to see... Me=1 him=0. Brothers and CPP also think they are 2 1/2" springs. ECE KNOWS they are 2 1/4". I would start with them.

12-24-2011, 11:06 AM	#9
sneezys72 Registered User Join Date: Nov 2000 Location: Glendale Az Posts: 73	Re: 1/2ton leaf spring bushings I will look and see if I can find the box mine came in. I saved it because I also had a hard time finding them. Finally found them at the main Napa here in Phoenix. You should call ECE. If they don't have them, they will tell you where to get them. I went to a local spring shop a couple of years ago to get U bolts made and the guy said they were 2 1/2" springs. I told him they were 2 1/4" and he told me I was either wrong or they were not original. Took a spring in for him to see... Me=1 him=0. Brothers and CPP also think they are 2 1/2" springs. ECE KNOWS they are 2 1/4". I would start with them.