|
Re: pics of 59-60 impala dash in your c10
layedout68,
all trim i hand formed from 6061 aluminum drilled and taped with # 4-40
studs and nuts to install. dash trim and top of door panel was 1/4 X 1/2
and the door panel trim was 1/4 x 1/4 . start sanding with a d.a. sander with
240 grit paper follow sanding with 400 dry 600 wet 800 wet 1000 wet
1500 wet then 2000 wet then you can hand rub mothers billet polish with
microfiber to mirror finish or you can use a buffer. i have found this system works better by hand on smaller or bent pieces as the buffer will try to rip the piece from your hand regardless the speed or location on buffing wheel
good luck
|