Quote:
Originally Posted by nacho55
Ok so I found my temp sensor and have that situated, and other leads to the o2 sensors but like I suspected one side was cut when the person I got the motor from removed it for me, and now with the harness all tore apart I don't know which one goes to which side of the motor, i suspect this will be important fot the pcm, does any one know which pins go to the passenger side, or drivers then I will be able to get them routed properly.
Thanks
Posted via Mobile Device
|
Bank 1 sensor 1 low signal blue connector pin #29 tan/white
Bank 1 sensor 1 high signal blue connector pin #69 purple/white
Bank 2 sensor 1 low signal blue connector pin # 26 tan
Bank 2 sensor 1 high signal blue connector pin # 66 purple