The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mr48chev** · 01-03-2012, 02:16 AM

Simple would be the Column out of a 4 speed 70/72 if you are running a floor shift or the automatic column out of one if you want to run a column shift automatic. You would probably have to rework the steering shaft below the column a bit though in most cases as the shaft goes from the steering wheel down to a U joint a few inches below the end of the column.

The 80 something Chevy van columns that come on vans that had the ignition switch in the dash are popular because they are really clean and the tilt is one of the cleanest tilts around.

01-03-2012, 02:16 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,824	Re: steering column ideas...... Simple would be the Column out of a 4 speed 70/72 if you are running a floor shift or the automatic column out of one if you want to run a column shift automatic. You would probably have to rework the steering shaft below the column a bit though in most cases as the shaft goes from the steering wheel down to a U joint a few inches below the end of the column. The 80 something Chevy van columns that come on vans that had the ignition switch in the dash are popular because they are really clean and the tilt is one of the cleanest tilts around.