|
Re: How to achieve the stance I want
She looks pretty level, but here goes.... You can cut 1 full ring off the bottom of the front coils, for a 2-2 1/2" drop. That is as far as I would go on the spring . You might try a 1" block in the rear, & see how that stands. If you want the truck lower, you will need to use a drop spindle/spring combo up front, & a drop spring , or spring /block combo in the rear. Best of fun,crazyAL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|