|
Re: New 2nd row suburban seats
The head room is fine. I forgot to mention that I had a 1/2 hole drilled all the way through them. When I mounted them I found that using 2 bolts (1 to the floor and then 1 to the seat was the easiest. I used #8 grade bolts and put washers under them. I also used washers on the back to level the ride height. These seats to tilt back so you can adjust how straight up you sit also.) They do sit up 2 or three inches higher than the front seat but I have had adults ride back there and you still have 3 or 4 inches to the ceiling. I figured it didn't really matter, how many times do you have adults in the back seat anyway. I also mounted the 3rd row of seat and they are removable and tilt up out of the way if you need more room.
Not that you ask but here is a few pics of the rear seat incase you go in that direction also. I mounted the brackets on top of some 1/2 nuts for spacers. I painted the nuts black so they don't show. I can get more pics with them in place and in the sitting position if you would like and more of the middle seat mounts.
|