The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Ranger6202 · 01-23-2012, 11:00 AM

If you have the harness and the engine there, i know for sure that the stock oil pressure sensor connector will be different between the two. But i think all the others are the same. Just check for all the plugs and the pins in them to match what you have on the engine and you should be good. The harness should have DBW, so make sure the harness is DBW and not DBC. Then get an ecm with the green and blue connectors.

01-23-2012, 11:00 AM	#3
Ranger6202 Registered User Join Date: Dec 2011 Location: Lyman Wyoming Posts: 109	Re: 2006 Harness? If you have the harness and the engine there, i know for sure that the stock oil pressure sensor connector will be different between the two. But i think all the others are the same. Just check for all the plugs and the pins in them to match what you have on the engine and you should be good. The harness should have DBW, so make sure the harness is DBW and not DBC. Then get an ecm with the green and blue connectors.