Re: 1967 C-10 LS POWERED Build
Quote:
Originally Posted by Super73
Ok, I had a minute and modeled it. I used 10-1cr as I am not sure what gasket etc you are using. Stock L92 heads, singlplain with a 750 non vacum carb, 1 7/8 headers/30" long and the am is set on a 108 intake centerline.
Peak TQ is way up here at 5,700rpm = 438ftlbs
HP Peaks at 6,800 and carries it to about 7,100 = 519hp
|
Cool deal! The compression ratio is 9.67:1 according to GM service information. The cams center line is 110 and as far as the head gaskets. I just used GM factory gaskets and head bolts.
__________________
1967 C-10 (project)
1964 Pontiac Lemans (Treasure lol)
2009 GMC Denali Truck (DD)
|