View Single Post
Old 01-28-2012, 10:19 AM   #5
DetroitDan
Registered User
 
DetroitDan's Avatar
 
Join Date: Dec 2009
Location: Epping, NH
Posts: 605
Re: Which K5 Blazer?

new driver is going to want to be darned careful in a short wheelbase truck, even if it isn't lifted. Not very forgiving in the handling department.

Mine had rot in all the usual places that had been previously repaired. I had to do the rear floor dropoffs area, which is like the rear seat passengers footwell. I even had to put in new seatbelt mounts on the sides. The rear crossmember/body mount on top of the frame at the back is prone to rot away, causing the body to sag and the tailgate not to function properly. An 84 I had was so bad it broke the rear glass hitting a big bump, from the body bouncing down further than it should be able to go. Blazers are particularly susceptible to rot underneath, so look close at these area. Mine needs a rear support, they are available through LMC and others. Don't know yet how bad a job it will be, waiting for nicer weather to address it.
I'd check Ebay for body lifts, or Amazon.
Colorado K5 is a great source, CK5

Good luck with it
__________________
1982 Chevy K30 CCLB fleetside. Formerly a cab and chassis, now a fleetside dually with the rear wheels tucked underneath. 454/th400/np205/C14/D60, 6/4 inch LIFT, not drop.
DetroitDan is offline   Reply With Quote