[kev2809]

can i get some closeup pics?

i did a search and this is how it should come out i believe..


Once you have a key made for the door lock here is how you remove the ignition lock cylinder:
Insert the key into the ignition and make sure it turns the ignition on & off. Turn it to the left as far as possible, insert a straightened large paper clip or similar size wire into the hole in face of the lock and depress the spring loaded pin. Turn the lock further to left and it should come out. As you turn the lock further to the left you will have to remove the paper clip or wire or it will bind in the hole. Sometimes you have to wiggle the cylinder a little to get it out.


if you dont feel like messin with it or its not worth it, thats cool, just let me know.