The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Ranger6202 · 01-31-2012, 02:56 PM

Measured the manifolds, the farthest they stick out from the cylinder heads looks to be 3-3.5". And thats not counting the flange, thats just the straightway where all the tubes come in. Both flanges seem to stick out about 5-5.5" at their farthest from the flat flange on the back of the block that bolts to the tranny. The driver's side flange hangs down 6.5-7" and the passenger side hangs down about 7-7.5" from the center of the last manifold to cylinder head bolt.

01-31-2012, 02:56 PM	#20
Ranger6202 Registered User Join Date: Dec 2011 Location: Lyman Wyoming Posts: 109	Re: Shorty Headers Measured the manifolds, the farthest they stick out from the cylinder heads looks to be 3-3.5". And thats not counting the flange, thats just the straightway where all the tubes come in. Both flanges seem to stick out about 5-5.5" at their farthest from the flat flange on the back of the block that bolts to the tranny. The driver's side flange hangs down 6.5-7" and the passenger side hangs down about 7-7.5" from the center of the last manifold to cylinder head bolt.