[tc4x4]

This is what western chassis inc said....

Unfortunately you have a application that is rare for a C-30 however they are out there. You will need the C-20 Saddle that will be needed to be welded in. The Axle will sit inside and may have a little gap on the sides of the housing but will work.

They are sending the right part for my axle, it needs to be welded on, which is not a bid deal. They have really great customer service and were really fast getting back with me to solve the problem. The new part welds under the old spring perch. They said the saddle does not have to be touching the axle tube all they way around but just the bottle. A weld bead along the areas of the saddle that are touching the axle tube would be fine for strength. Its mostly to keep it from moving they said.

Here is the pic of the new one. The one in the back is the wrong one that was sent.