[ddsmith]

I just looked on the web and found this http://www.zip-products.com/Corvette...B681E664C89597 It is designed to repair corvette fiber optics wires. Looking at this and knowing that the purpose of this line is to transmit light you may want to try and splice the line back together. I would get some shrink tubing that when it is fully contracted is slightly smaller than the fiber optic line. Slide the shrink tubing prior to shrinking over the fiber optic wire and slide the other piece of fiber optic wire in to butt against the other piece. Heat up the shrink tubing and it should grab tight and hold the pieces together. Make sure the fiber optic wires are butted tightly together to prevent the shrink tubing from blocking the light transfer from one wire piece to the other wire piece. Good luck.