|
Re: Upper a arm bolts?
The problem I'm having right now is I have only two shims on either side on both bolts and the camber is only at -.5*. I'm trying for -1* camber and about 7degrees caster with a 16th toe out. Right now I can't achieve those specs the I'd not enough thread on the bolt to take out shims. And even so. Not enough shims to get to that caster without making my tires stick out at the top with a million degrees positive camber
I am moving the lower a arm forward an 3/4 of an inch to get more caster as well
Posted via Mobile Device
|