|
Re: door hinge pin kit
I did mine in a day with the doorman hardened steel pins and brass bushings. Its alot of work and requires a 4 inch cut off wheel, some punches and indexed drill bits. I left half of the bracket still bolted to the cab so I did not have to adjust the door so much.
Pro's of the doorman pins:
-I doubt they will ever wear out.
-under 5 bucks for parts.
Cons:
-Carefull surgical cuts on door pins with a cut off wheel.
-Takes all damn day.
If you decide on this let me know and I can explain in more detail.
|