[Ridnhi]

Originally Posted by rsavage

One of the things to remember on the rear panel brackets is that there are 6 "L" brackets that you need and the two top chrome strips that the top of the panel slip up into, in addition to the 6 standoffs. The "L" brackets go on the floor in back of and in front of the wheel tub and most importantly, the back of the panel screws to an "L" bracket mounted on the rear box post. Without these brackets, the panel will have nothing to fasten to at the rear up and down and the panels will push in along the floor. If you are looking for a complete set including the upper chrome strips they will go for significantly more than $35 shipped. The photo shows the 2 screws vertically and horizontally that the panels fasten to.

rasavage- I already picked up the chrome strips from a fellow board member. I figured that I could make some "L" brackets out of some smaller angle iron. I would buy some if they came up for sale. Right now I'm wanting just the 6 standoffs. Hope mine turns out as nice as yours is! Thanks for your help!