The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Eagle Custom · 02-16-2012, 08:37 PM

I bought the drop spindles and coils used so not real sure what drop they are but was told 3in spindle and 2.5in coils. I did measure from lower ball joint to center of spindle and they was 3in difference in them from my stock spindles as for the coils I did not put a tape on them but they were at least 1.5 to 2in shorter than my stock coils (drop coils were brand new) I just thought the old ones had sagged a little so at least it should be 4.5 in. In the pics with the Coy's it only had them on pic side and door ,fender and hood are not on the truck but it does have a SBC and trans in it .

02-16-2012, 08:37 PM	#25
Eagle Custom Registered User Join Date: Mar 2011 Location: Hartsburg Mo Posts: 113	Re: 77 2wd blazer build I bought the drop spindles and coils used so not real sure what drop they are but was told 3in spindle and 2.5in coils. I did measure from lower ball joint to center of spindle and they was 3in difference in them from my stock spindles as for the coils I did not put a tape on them but they were at least 1.5 to 2in shorter than my stock coils (drop coils were brand new) I just thought the old ones had sagged a little so at least it should be 4.5 in. In the pics with the Coy's it only had them on pic side and door ,fender and hood are not on the truck but it does have a SBC and trans in it .