The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

77c10 · 02-20-2012, 11:52 AM

Bolted my accessory bracket up to my Gen II LT1, installed the PS pump, alternator and AC delete pulley. Started the motor, belt stays on like it should. Only thing is my alternator is not charging. May be bad. Removed the old manual steering gearbox to make way for the new power steering unit that I am getting next weekend. Picked up my upper and lower control arms from the machine shop where they got new polyurethane bushings and ball joints. Primed and started to paint them. Bolted in my new B & M Megashifter. The PO on my truck installed a tranny mount Lokar 23" double bend shifter. Had to fab a cover plate out of aluminum to cover the hole he cut in the floor. Also installed a new windshield washer resevoir in my 04 Suburban.

02-20-2012, 11:52 AM	#22
77c10 Registered User Join Date: Aug 2011 Location: Gallatin, TN Posts: 782	Re: what did you get done 2/19/2012 edition Bolted my accessory bracket up to my Gen II LT1, installed the PS pump, alternator and AC delete pulley. Started the motor, belt stays on like it should. Only thing is my alternator is not charging. May be bad. Removed the old manual steering gearbox to make way for the new power steering unit that I am getting next weekend. Picked up my upper and lower control arms from the machine shop where they got new polyurethane bushings and ball joints. Primed and started to paint them. Bolted in my new B & M Megashifter. The PO on my truck installed a tranny mount Lokar 23" double bend shifter. Had to fab a cover plate out of aluminum to cover the hole he cut in the floor. Also installed a new windshield washer resevoir in my 04 Suburban.