The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

acemang · 02-20-2012, 08:59 PM

Thanks. Forgot to add some extra info. Engine 350 SBC 5.7 liter, hydra matic 400 tranny, 373 POSI rear end new battery, new Edlebrock intake manifold, Edlebrock carb 600cfm Edlebrock valve covers, Edlebrock valve breathers and K&N intake. Rally 6 lug wheels, only 400 miles on new tires, fresh oil change.
has a bench seat from 89 chevy pick up truck. The seat in the bed is the original, which will soon be off to my cousins shop for an overhaul. So if anyone has a need for that I will have no problem parting with the one currently in the cab. All elecrical and light works and gauges all except the speedo. As you all can see there is some severe rusting out on the bottom of the passenger door side. The door as well rusted right through. Im not sure what can be done, if anything, or if im going to have to get a new door perhaps? Right below the door as well, can that be fixed? maybe something fabricated?

02-20-2012, 08:59 PM	#3
acemang Registered User Join Date: Feb 2012 Location: Liberty Lake, WA. Posts: 59	Re: New to the Board. My project: 1969 C10 Thanks. Forgot to add some extra info. Engine 350 SBC 5.7 liter, hydra matic 400 tranny, 373 POSI rear end new battery, new Edlebrock intake manifold, Edlebrock carb 600cfm Edlebrock valve covers, Edlebrock valve breathers and K&N intake. Rally 6 lug wheels, only 400 miles on new tires, fresh oil change. has a bench seat from 89 chevy pick up truck. The seat in the bed is the original, which will soon be off to my cousins shop for an overhaul. So if anyone has a need for that I will have no problem parting with the one currently in the cab. All elecrical and light works and gauges all except the speedo. As you all can see there is some severe rusting out on the bottom of the passenger door side. The door as well rusted right through. Im not sure what can be done, if anything, or if im going to have to get a new door perhaps? Right below the door as well, can that be fixed? maybe something fabricated?