I needed some where to mount 4 switches for my FD strobes and L.E.D.'s. So I came up with this. My NBS is 2wd so I used the space where the 4wd buttons would have been, since the "pocket" that is there is pretty much useless.
Top switch is for the front Strobes, next one down is for the rear strobes, the third is for the windshield mounted L.E.D., and the bottom is for the L.E.D.'s in the excab windows. The small red push button changes the flash pattern on the L.E.D.'s.
I use some 5mm "ply wood" I had left over from my basement remodel.
After a quick coat of paint:
Wiring up the switches:
.
Testing:
Installed:
