The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Stepper86 · 02-26-2012, 03:01 AM

[QUOTE=beamn7;5212202]Pretty sure that Driver's side is TCC diag plug to be used with a test light and pass. side one is for monitoring exhaust readings / adjusting carb using a dwell meter set to 6 cyl scale. Should vary between 25 and 35 ohms while running.[/QUOTE

Thanks for clearing that out, now not only do I know what they are for I will plug on a meter and see what readings I get, Had my carb opened recently and it´s still not running like I want it too.

02-26-2012, 03:01 AM	#6
Stepper86 Registered User Join Date: Sep 2011 Location: Stockholm Posts: 263	Re: What is this wire for? [QUOTE=beamn7;5212202]Pretty sure that Driver's side is TCC diag plug to be used with a test light and pass. side one is for monitoring exhaust readings / adjusting carb using a dwell meter set to 6 cyl scale. Should vary between 25 and 35 ohms while running.[/QUOTE Thanks for clearing that out, now not only do I know what they are for I will plug on a meter and see what readings I get, Had my carb opened recently and it´s still not running like I want it too. __________________ Tom.______________________________________ The fleet: 2007 BMW 530xi M (daily driver) 1986 C-10 Stepside (project "my time") 1992 Corvette cab (summer time daily driver) 1969 Cadilac DeVille Cab ("it just need some paint")