The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PanelDeland · 03-01-2012, 11:09 AM

Those driver brackets look like the ones in my Panel.I can't see the pass ones well enough to tell but Panel Passenger seats were mounted with a bracket that had a pull pin in the rear to allow them to tilt the back and then flip forward.The front pass brackets were a hinged style to allow the flip.The back had a wingnut to allow it to tilt forward.

Just as a side note,the pass seat in the Panels is listed as an option,but every one I have ever seen had one in it and was listed on the SPID.

03-01-2012, 11:09 AM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Are all utility buckets created equal?? Those driver brackets look like the ones in my Panel.I can't see the pass ones well enough to tell but Panel Passenger seats were mounted with a bracket that had a pull pin in the rear to allow them to tilt the back and then flip forward.The front pass brackets were a hinged style to allow the flip.The back had a wingnut to allow it to tilt forward. Just as a side note,the pass seat in the Panels is listed as an option,but every one I have ever seen had one in it and was listed on the SPID. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"