[RexDodge]

Guess what I did today. The first picture is your clue. I try to get all the use out of my cut off wheels I can! The second and third show the cuts I made to the frame to allow clearance for the gas tank. I intend to mount it with the mid flange up against the upper edge if the frame rail. I have some 1/8" strap stock that I will form to support the tank. It will look like a factory installation when I am done. At least that is what I am shooting for. I will be fabing up a receiver that will box in the frame at the rear and add strength. The last picture shows the filler necks current location. I will need to get creative with the frame at that point to allow clearance to get to the tail light filler. I had to cut a little of the top rail to allow me to drop the tank into place. I will re-install all that I can to have a spot to bolt the bed securely. Tomorrow I hope to pressure wash the back half so I have clean metal to work with. I will be fabing my c notch's and shock relocation brakets and moving my shocks. Onward!