They wont be a direct bolt in, you will need to redrill the holes in the frame,it but should work out. Im not sure if the eng brackets are different from BB to SB, but the frame stands should be the same 73 - late 70s at least. the stands have several different sets of holes. I have used the stands & deisel brackets/mounts to install a BB olds in my longhorn......I redrilled the top of the frame to bolt them down, & opted to weld the stands on the crossmember(the eng was already positioned). Good luck,crazyL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|