The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wrenchbender Ret · 03-09-2012, 04:41 PM

There is an adapter made for this but you can cut the wires off the old switch about 2 in. from the connector & cut the new switch & splice the wires. It is best to solder them & use heat shrink tubeing but you can use but connecters.

03-09-2012, 04:41 PM	#3
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: turn signal switch wireing There is an adapter made for this but you can cut the wires off the old switch about 2 in. from the connector & cut the new switch & splice the wires. It is best to solder them & use heat shrink tubeing but you can use but connecters.