[stomper]

From the looks of your install, that's as good as it gets unless you do something custom. The 4x4 one is going to be shorter because of the 2" set-back on 4x4's. I'm guessing 2" shorter (i.e. too short for 2wd) but I'm not 100% sure.

I recently replaced mine with one from O'Rileys for a later model truck. It works fine but it's probably 4+ in too long. It snakes around a bit and probably would bind if it weren't for the teflon coating inside. I wish it looked as good as yours.

You might try to twist it a little to get the cable to exit straight out the back of the carb bracket and curve the opposite direction.