[ChuckW]

A little late in the thread I suppose, but here's my two bits... I picked up a bar that came from LMC. Was "supposed to fit nicely. NOT. It's the type with 4 stacked bushings on the A arm sides. I first noted that the bar seem excessively wide. So after centering it etc I turned the wheel to lock.. Yeah, the pitman arm was hitting and the control arms were really close. The fwd frame bushings were to be mounted flush on the frame rails.. Not!
Long story short. This bar would need excessive bracket mods to mount. I didn't really like the looks of it in the 1st place. It would seem to me that with stacked bushings (4ea per side) a lot of compression would need to take place before the bar would start working...??
I'm going to go with the ECE bar as it looks like what I'm after and has a much more solid mount....
PS This bar is an ADDCO unit and I'm pretty sure it's for lowered trucks... Mine's stock height.