Finished the wiring in the Engine Compartment today along with the tail lite wiring. I also insulated the Drivers door with sound proofing material. Here is a couple of pictures of where the truck sets right now. I took the differential to a friend today who is changing the axle bearings along with the seals and the front seal on the diff. After looking closely at the yoke on the front of the differential I found that the surface that the U Joint sets in was badly distorted so im having him put a new yoke on the front of the Diff. Here is a couple of pics of the truck, I also modified the original Accelorator Linkage to fit today also.
JRBECK64
