The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lazerstrouts · 03-25-2012, 11:31 PM

2008 chevy impala back seat, it is the bottom fold forward style that was an option. the base for the lower fits very well over the original seat frame. back and bottom are a 60/40 split that fold along with an armrest.

bed was raised 5 inches so the rear shock mounts didnt stick through the bed.

it runs and drives, im chasing some bad/unhooked grounds to fix my abs and 4wd modules. i still need to design and install the inner fender wells and cab floor. i also need to find some aged barn wood for the bed as whats in it is rotten at the front and design the mount location for the fuel fill neck.

before its "done" it will get the fenders widened, rears lowered and someplace i need to find a set of running boards. my other 2 trucks are too complete to scavange parts from.

03-25-2012, 11:31 PM	#12
lazerstrouts Registered User Join Date: Feb 2012 Location: Omaha, Ne Posts: 55	Re: 01 tahoe chassis under AD gmc short box 2008 chevy impala back seat, it is the bottom fold forward style that was an option. the base for the lower fits very well over the original seat frame. back and bottom are a 60/40 split that fold along with an armrest. bed was raised 5 inches so the rear shock mounts didnt stick through the bed. it runs and drives, im chasing some bad/unhooked grounds to fix my abs and 4wd modules. i still need to design and install the inner fender wells and cab floor. i also need to find some aged barn wood for the bed as whats in it is rotten at the front and design the mount location for the fuel fill neck. before its "done" it will get the fenders widened, rears lowered and someplace i need to find a set of running boards. my other 2 trucks are too complete to scavange parts from.