The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68gmsee · 03-28-2012, 06:39 PM

You won't need to drill any holes.. at least I didn't have to on my 68 GMC or 69 chevy. Also, the brake lines you have now should work unless they've been changed around. Just gently move them out of the way while you install the bracket/booster/m.c. setup and reconnect them. You should have enough slack to rehook them to the new master cylinder.

I don't know if Mike's B&G kit includes the brake pushrod, but if it doesn't, you will need that.

03-28-2012, 06:39 PM	#5
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Want to convert to power brakes You won't need to drill any holes.. at least I didn't have to on my 68 GMC or 69 chevy. Also, the brake lines you have now should work unless they've been changed around. Just gently move them out of the way while you install the bracket/booster/m.c. setup and reconnect them. You should have enough slack to rehook them to the new master cylinder. I don't know if Mike's B&G kit includes the brake pushrod, but if it doesn't, you will need that.