O.K. guys, here's the axle swap.
I bought an 84 M1008 off of craigslist. Parted it out and kept the axles which were the only items I was really after. The teardown begins.
I sterted finding all sorts of problems like this grenaded hub lock gears.
And half the teeth were sheared off of the ring gear as well as the pinion gear teeth. When the teeth let go they got caught up in the carrier chewing up everything in the pumpkin. Sadly I don't have any pics of this, I wasn't thinking of the camera at the time, only explatives and plots of P.O. murder.
So the parts quest began. I'll try to remember everything and break it all down into a list, I have included part numbers where available):
http://diy4x.com/
14 bolt rear disk kit
easy inch
14 bolt guardsman
14 bolt razorback bolt on shock mounts
greasable bolts (12)
FG engine crossmember kit (for a later date)
FGB52 kit w/frame eye hanger and shackles
FG axle flip-n-switch kit with shackles
http://www.offroaddesign.com/catalog.htm
bolt in steering box kit (GU29001)
extended brake lines front and rear (Gu30011)
PSC economy steering box (80-872WD) (later version box with O-ring type fittings)
U bolt kit for Dana 60
U bolt kit for 14 bolt
http://www.ballisticfabrication.com/
Double shear D60 kit (HSA611)
Full steer kit with 7/8 QA-1 Heims (STE-623-1)
D60 diff cover (DIF-2002-2)
14 bolt diff cover (DIF-2001-2)
Captain Fab Hydroboost Kit with his tool
http://67-72chevytrucks.com/vboard/s...d.php?t=347480
http://www.rustysoffroad.com/
RX200 shock (R-211) (for the rear)
RX200 shock (R-213) (for the front)
http://performancetruck.com/
Deaver/Stanley spring (002x/22-613) (front)
Deaver/Stanley spring (200x/22-579) (rear)
http://www.classicheartbeat.com/default.htm
Brake rod boot
72 blazer front brake line set (inline tube)
http://www.highangledriveline.com/default.htm
14 bolt 1350 u-bolt yoke
NP205 rear flange kit
1350 CV drive shaft
(will also buy the NP205 rear E-brake kit at a later date)
http://www.ringpinion.com/
D60 front ring and pinion kit 4.56
D60 front axle carrier rebuild kit with shims/bearings/seals
D60 shaft u joints
D60 hub rebuild kit with all bearings /seals
D60 kingpin rebuild kit
D60 set-up bearings
Eaton E-locker
Warn premium locking hubs
14 bolt hub rebuild kit with bearings/seals
14 bolt front pinion seal
http://www.partsmike.com/
D60 lower kingpin cap (PM37299) (custom made with recessed grease zerts)
D60 ARP studs (ARP-D60AK) (ballistic fab F-ed up my order and I had to buy three of these studs from parts mike to finish my install)
https://www.rockauto.com/?merchant_r...ockAuto%2C+LLC
Front D60 brake caliper rebuild kits
Front D44 calipers with soft lines
Brake pads
Brake rotors
Brake caliper banjo bolts with copper crush washers for front and rear
That's all I can remember at the moment.