[ADub]

Got the engine stands and motor mounts in the frame. I ended up just buying a kit from Early Classic. No time left to play around with fabbing my own. They weren't too expensive and I picked up some new body mounts from them as well.

Moved on to prepping the body to be pulled. I welded in the patch panel over the hole for the old gas tank filler neck. Ground off some paint where it was bubbling on the cab corner. The truck has about 6 layers of old paint and bondo....

I went ahead and cut the transmission hump out of the floor and positioned the factory "high hump". This is needed to clear the T56.