[chebyshortbox65]

I used factory compressor down in the frame modifying the bracket to clear motor mounts for hoses from a 2005 express van with 4.8 and used the factory hoses I had to notch the frame a bit and bend the suction line a little. My truck was a 6 cyl and the lines came out the driver side for the condensor so I notched the core support on the lower right side and flipped the condenser upside down so now they exit at the lower right side since Im a diesel mechaninc i have all kinds of fittings and hose so I cit the express van hoses where needed and crimped new fittings ,a/c works great 35 degrees been like that for a year with no problems
Posted via Mobile Device