[butch86]

i made one of my own from an old stainless steel sink for the manual side and for a cabinate side i osed black pipe to make 2 sprayer poles with high pressure nozzels 5 down each side and 4 on top. only the nozzels are inside the can (55 gal) i have a old 14inch wheel in the bottom that spins inside about 20 rpm hooked to a 1/3rd hp electric motor. i have a old 10 gal electric water heater from and old rv that i run the solvent through. it only heats the solvent to about 110degree but that cleans it well with good solvent in it. i get the powder solvent from a local dealer. the presure is provided by an old pump and motor from a industeral preassure washer. it has a few strainers and filters on it i have to clean out after every good use. its a decent pay out for the job it does cleaning