[my67c20]

SunSoaked i bought the kit from TSM, loaded calipers, brackets, pads and hoses. Yes they are caddy calipers w/ parking brake. Really happy with it. Hooking up the parking brake took some thought. I used a parking brake cable from an 85 c20. I had to cut a washer to fit over the cable to prevent the cable from sliding up in the tube. Cut off the spring and the drum mounting tabs. The TSM kit comes with the round spacers i welded a bolt to the axle and an angle to the spacer to better secure the cable. This cable required i move the parking brake bracket on the trailing arm. Rather than move it i made a new one. Fortunatly there was a hole in the trailing arm that i could use. I also bought a 36" piece of 1/4-28 all thread that i replaced the parking brake cable bar on the passenger side (bracket that holds the cable). Other than that i had to weld on the brackets for the lines from the calipers and the tab for the rubber hose. To this point it has been pretty easy. Just be prepared for some sticker shock. Also you will need the panhard bar from CPP.