The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Automatic Transmission Conversion Question

MikeN · 05-01-2012, 11:12 AM

For a variety of reasons, I'm converting my 64 C10 to an automatic transmission, specifically a TH350. I found a pretty nice used 60-66 auto steering column with all the linkage. The only thing I'm lacking would be the lever that bolts to the shift selector on the side of the transmission. Has anyone ever changed one of these trucks from a Powerglide to a TH350 or TH400? Did you use the stock linkage? If so, where did you find a lever to bolt to the TH350 or TH400 that worked with the Powerglide linkage?

Thanks for any assistance or insight you might have.

Mike

05-01-2012, 11:12 AM	#1
MikeN Registered User Join Date: Oct 2007 Location: Marietta, GA Posts: 814	Automatic Transmission Conversion Question For a variety of reasons, I'm converting my 64 C10 to an automatic transmission, specifically a TH350. I found a pretty nice used 60-66 auto steering column with all the linkage. The only thing I'm lacking would be the lever that bolts to the shift selector on the side of the transmission. Has anyone ever changed one of these trucks from a Powerglide to a TH350 or TH400? Did you use the stock linkage? If so, where did you find a lever to bolt to the TH350 or TH400 that worked with the Powerglide linkage? Thanks for any assistance or insight you might have. Mike