Quote:
Originally Posted by FirstOwner69
Attached are pics of my 69 with A/C and 350. The A/C brackets were not used on any trucks I've seen after 69 (thank God). The service manual shows these brackets for the 350 and shows the more commonly seen bracket type that was used in later years for the 307 with emissions equipment. Obviously, the routing of the negative cable would have to differ in terms of the point of securement depending on the A/C setup. The cables shown are the original GM cables. I don't recall ever removing them until I started my project.
The top pic is the negative. Other 2 are the positive showing the 2 retention locations.
Hope this helps.
|
Thank you! That does help. Perfect shot of the routing.