Dear god this thing grips the corners! And it's not even aligned! The caster mod and one ton sway bar do wonders. Not to mention qa1 ball joints and urethane bushings help
For those that may wonder what the caster mod is take the shafts on your lca (lower control arm) and drill them to move the lca forward 3/4 to 1" inch I did with some layout die and an 11/16 jobber bit. This should net you 7*+ neg caster which is great for anti dive and turn in and camber gain in a corner. Some trimming of the crossmember and/or bushing sleeve will be required also get rid of your stock upper ball joints. The only move in one direction! In and out and Hardly back and forth so these can bind easily.
Some pics of the control arm moved forward
Posted via Mobile Device